Glucosinolates are plant thioglucosides, which act as chemical defenses. Upon tissue damage, their myrosinase-catalyzed hydrolysis yields aglucones that rearrange to toxic isothiocyanates. Specifier proteins such as thiocyanate-forming protein from Thlaspi arvense (TaTFP) are non-heme iron proteins, which capture the aglucone to form alternative products, e.g. nitriles or thiocyanates. To resolve the electronic state of the bound iron cofactor in TaTFP, we applied continuous wave electron paramagnetic resonance (CW EPR) spectroscopy at X-and Q-band frequencies (∼9.4 and ∼34 GHz). We found characteristic features of high spin and low spin states of a d5 electronic configuration and local rhombic symmetry during catalysis. We monitored the oxidation states of bound iron during conversion of allylglucosinolate by myrosinase and TaTFP in presence and absence of supplemented Fe2+. Without added Fe2+, most high spin features of bound Fe3+ were preserved, while different g’-values of the low spin part indicated slight rearrangements in the coordination sphere and/or structural geometry. We also examined involvement of the redox pair Fe3+/Fe2 in samples with supplemented Fe2+. The absence of any EPR signal related to Fe3+ or Fe2+ using an iron-binding deficient TaTFP variant allowed us to conclude that recorded EPR signals originated from the bound iron cofactor.

Stapled peptides derived from the Ugi macrocyclization comprise a special class of cyclopeptides with an N-substituted lactam bridge cross-linking two amino acid side chains. Herein we report a comprehensive analysis of the structural factors influencing the secondary structure of these cyclic peptides in solution. Novel insights into the s-cis/s-trans isomerism and the effect of N-functionalization on the conformation are revealed.

The enormous diversity of terpenes found in nature is generated by enzymes known as terpene synthases, or cyclases. Some are also known for their ability to convert a single substrate into multiple products. This review comprises monoterpene and sesquiterpene synthases that are multiproduct in nature along with the regulation factors that can alter the product specificity of multiproduct terpene synthases without genetic mutations. Variations in specific assay conditions with focus on shifts in product specificity based on change in metal cofactors, assay pH and substrate geometry are described. Alterations in these simple cellular conditions provide the organism with enhanced chemodiversity without investing into new enzymatic architecture. This versatility to modulate product diversity grants organisms, especially immobile ones like plants with access to an enhanced defensive repertoire by simply altering cofactors, pH level and substrate geometry.

A multicomponent macrocyclization strategy towards cyclic lipopeptides is described. The approach relies on the utilization of the Ugi and Passerini multicomponent reactions for the cyclization of peptides and oxo-peptides, and here it is employed for the construction of a small library of analogues of the natural products mycosubtilin and surfactin A. A key feature of this method is the simultaneous incorporation of either one or two exocyclic lipid tails along with the macrocyclic ring closure, which is only possible due to the multicomponent nature of the macrocyclization step. The evaluation of the anticancer activity of the lipopeptide library showed that the installation of a second lipid moiety in the surfactin scaffold leads to a more potent cytotoxicity in cancer cells. This is a new example of the multicomponent reaction potential in rapidly producing natural product analogues for biological screening.

For the first time, spin-labelled coumpounds have been obtained by isonitrile-based multi component reactions (IMCRs). The typical IMCR Ugi-protocols offer a simple experimental setup allowing structural variety by which labelled diketopiperazines (DKPs) and peptide–peptoid chimera have been synthesized. The reaction keeps the paramagnetic spin label intact and offers a simple and versatile route to a large variety of new and chemically diverse spin labels.

Increasing the diversity of peptide cyclization methods is an effective way of accessing new types of macrocyclic chemotypes featuring a wide variety of ring sizes and topologies. Multicomponent reactions (MCRs) are processes capable of generating great levels of molecular diversity and complexity at low synthetic cost. In an attempt to further exploit MCRs in the field of cyclopeptides, we describe a bidirectional multicomponent approach for the synthesis of N-alkylated macrocyclic peptides of varied sequences and cross-linking positions. The process relies on the execution of two Ugi reactions between peptide diacids and diisocyanides. Varying the amino component enabled the installation of exocyclic elements of diversity, while skeletal diversity was created through different side chain and backbone cyclizations. This procedure shows prospects for the rapid scanning of the chemical space of macrocyclic peptides for applications in chemical biology and drug discovery.

The multiproduct sesquiterpene synthase MtTPS5 from Medicago truncatula catalyzes the conversion of farnesyl diphosphate (FDP) into a complex mixture of 27 terpenoids. 3-Bromo substrate analogues of geranyl diphosphate (3-BrGDP) and farnesyl diphosphate (3-BrFDP) were evaluated as substrates of MTPS5 enzyme. Kinetic studies demonstrated that these compounds were highly potent competitive inhibitors of the MtTPS5 enzyme with fast binding and slow reversibility. Since there is a lack of knowledge about the crystal structure of multiproduct terpene synthases, these molecules might be ideal candidates for obtaining a co-crystal structure with multiproduct terpene synthases. Due to the structural and mechanistic similarity between various terpene synthases we expect these 3-bromo isoprenoids to be ideal probes for crystal structure studies.

Conditional gene expression and modulating protein stability under physiological conditions are important tools in biomedical research. They led to a thorough understanding of the roles of many proteins in living organisms. Current protocols allow for manipulating levels of DNA, mRNA, and of functional proteins. Modulating concentrations of proteins of interest, their post-translational processing, and their targeted depletion or accumulation are based on a variety of underlying molecular modes of action. Several available tools allow a direct as well as rapid and reversible variation right on the spot, i.e., on the level of the active form of a gene product. The methods and protocols discussed here include inducible and tissue-specific promoter systems as well as portable degrons derived from instable donor sequences. These are either constitutively active or dormant so that they can be triggered by exogenous or developmental cues. Many of the described techniques here directly influencing the protein stability are established in yeast, cell culture and in vitro systems only, whereas the indirectly working promoter-based tools are also commonly used in higher eukaryotes. Our major goal is to link current concepts of conditionally modulating a protein of interest’s activity and/or abundance and approaches for generating cell and tissue types on demand in living, multicellular organisms with special emphasis on plants.

There is a wide range of immobilisation reactions to tether substrates to a variety of surfaces for array-based analysis. Most of these immobilisation strategies are specific for a particular surface and require an additional linker to be attached to the substrate or the surface. Furthermore, the analysis of functionalised surfaces is often restricted to certain analytical techniques and therefore, different immobilisation strategies for different surfaces are desirable. Here we have tested an S-tritylated linker for non-covalent or covalent immobilisation of mannosides to polystyrene or gold surfaces. S-Tritylated mannosides with varying linkers were readily synthesised and used to add to biorepulsive maleimide-terminated preformed SAMs after in situ deprotection of the S-trityl group. In addition, S-tritylated mannosides themselves formed stable glycoarrays on polystyrene microtiter plates. The glycoarrays were successfully analysed by MALDI-ToF mass spectrometry, SPR spectroscopy, and interrogated with GFP-transfected Escherichia coli cells. This work has shown that a dual purpose linker can be used on multiple surfaces to form arrays allowing for different testing as well as analytical approaches.

Protein profiling probes are important tools for studying the composition of the proteome and as such have contributed greatly to the understanding of various complex biological processes in higher organisms. For this purpose the application of fluorescently labeled activity or affinity probes is highly desirable. Especially for in vivodetection of low abundant target proteins, otherwise difficult to analyse by standard blotting techniques, fluorescently labeled profiling probes are of high value. Here, a one-pot protocol for the synthesis of activated fluorescent labels (i.e.azide, alkynyl or NHS), based on the Ugi-4-component reaction (Ugi-4CR), is presented. As a result of the peptoidic structure formed, the fluorescent properties of the products are pH insensitive. Moreover, the applicability of these probes, as exemplified by the labeling of model protein BSA, will be discussed.