Tubulysins are among the most recent antimitotic compounds to enter into antibody/peptide‐drug conjugate (ADC/PDC) development. Thus far, the design of the most promising tubulysin payloads relied on simplifying their structures, e.g., by using small tertiary amide N‐substituents (Me, Et, Pr) on tubuvaline residue. Cumbersome solution‐phase approaches are typically used for both syntheses and functionalization with cleavable linkers. p‐Aminobenzyl quaternary ammonium (PABQ) linkers were a remarkable advancement for targeted delivery, but the procedures to incorporate them into tubulysins are only of moderate efficiency. Here we describe a novel all‐on‐resin strategy permitting a loss‐free resin linkage and an improved access to super potent tubulysin analogs showing close resemblance to the natural compounds. For the first time, a protocol enables the integration of on‐resin tubulysin derivatization with, e.g., a maleimido‐Val‐Cit‐PABQ linker, which is a notable progress for the payload‐PABQ‐linker technology. The strategy also allows tubulysin diversification of the internal amide N‐substituent, thus enabling to screen a tubulysin library for the discovery of new potent analogs. This work provides ADC/PDC developers with new tools for both rapid access to new derivatives and easier linker‐attachment and functionalization.

Aetokthonotoxin has recently been identified as the cyanobacterial neurotoxin causing Vacuolar Myelinopathy, a fatal neurologic disease, spreading through a trophic cascade and affecting birds of prey such as the bald eagle in the USA. Here, we describe the total synthesis of this specialized metabolite. The complex, highly brominated 1,2’-biindole could be synthesized via a Somei-type Michael reaction as key step. The optimised sequence yielded the natural product in five steps with an overall yield of 29 %.

The multicomponent backbone N‐modification of peptides on solid‐phase is presented as a powerful and general method to enable peptide stapling at the backbone instead of the side chains. This work shows that a variety of functionalized N‐substituents suitable for backbone stapling can be readily introduced by means of on‐resin Ugi multicomponent reactions conducted during solid‐phase peptide synthesis. Diverse macrocyclization chemistries were implemented with such backbone N‐substituents, including the ring‐closing metathesis, lactamization, and thiol alkylation. The backbone N‐modification method was also applied to the synthesis of α‐helical peptides by linking N‐substituents to the peptide N‐terminus, thus featuring hydrogen‐bond surrogate structures. Overall, the strategy proves useful for peptide backbone macrocyclization approaches that show promise in peptide drug discovery.

Aiming at providing an efficient and versatile method for the diversity‐oriented decoration and ligation of fullerenes, we report the first C60 derivatization strategy based on isocyanide‐multicomponent reactions (I‐MCRs). The approach comprises the use of Passerini and Ugi reactions for assembling pseudo‐peptidic scaffolds (i.e., N‐alkylated and depsipeptides, peptoids) on carboxylic acid‐functionalized fullerenes. The method showed wide substrate scope for the oxo and isocyanide components, albeit the Ugi reaction proved efficient only for aromatic amines. The approach was successfully employed for the ligation of oligopeptides and polyethyleneglycol chains (PEG) to C60, as well as for the construction of bis‐antennary as well as PEG‐tethered dimeric fullerenes. The quantum yields for the formation of 1O2 was remarkable for the selected compounds analyzed.

Benzylisoquinoline alkaloids (BIAs) are important secondary plant metabolites and include medicinally relevant drugs, such as morphine or codeine. As the de novo synthesis of BIA backbones is (still) unfeasible, to date the opium poppy plant Papaver somniferum L. represents the main source of BIAs. The formation of BIAs is induced in poppy plants by stress conditions, such as wounding or salt treatment; however, the details about regulatory processes controlling BIA formation in opium poppy are not well studied. Environmental stresses, such as wounding or salinization, are transduced in plants by phospholipid-based signaling pathways, which involve different classes of phospholipases. Here we investigate whether pharmacological inhibition of phospholipase A2 (PLA2, inhibited by aristolochic acid (AA)) or phospholipase D (PLD; inhibited by 5-fluoro-2-indolyl des-chlorohalopemide (FIPI)) in poppy plants influences wound-induced BIA accumulation and the expression of key biosynthetic genes. We show that inhibition of PLA2 results in increased morphinan biosynthesis concomitant with reduced production of BIAs of the papaverine branch, whereas inhibition of PLD results in increased production of BIAs of the noscapine branch. The data suggest that phospholipid-dependent signaling pathways contribute to the activation of morphine biosynthesis at the expense of the production of other BIAs in poppy plants. A better understanding of the effectors and the principles of regulation of alkaloid biosynthesis might be the basis for the future genetic modification of opium poppy to optimize BIA production.

Drought is one of the most important environmental stressors resulting in increasing losses of crop plant productivity all over the world. Therefore, development of new approaches to increase the stress tolerance of crop plants is strongly desired. This requires precise and adequate modeling of drought stress. As this type of stress manifests itself as a steady decrease in the substrate water potential (ψw), agar plates infused with polyethylene glycol (PEG) are the perfect experimental tool: they are easy in preparation and provide a constantly reduced ψw, which is not possible in soil models. However, currently, this model is applicable only to seedlings and cannot be used for evaluation of stress responses in mature plants, which are obviously the most appropriate objects for drought tolerance research. To overcome this limitation, here we introduce a PEG-based agar infusion model suitable for 6–8-week-old A. thaliana plants, and characterize, to the best of our knowledge for the first time, the early drought stress responses of adult plants grown on PEG-infused agar. We describe essential alterations in the primary metabolome (sugars and related compounds, amino acids and polyamines) accompanied by qualitative and quantitative changes in protein patterns: up to 87 unique stress-related proteins were annotated under drought stress conditions, whereas further 84 proteins showed a change in abundance. The obtained proteome patterns differed slightly from those reported for seedlings and soil-based models.

Boron's unusual properties inspired major advances in chemistry. In nature, the existence and importance of boron has been fairly explored (e.g. bacterial signaling, plant development) but its role as biological catalyst was never reported. Here, we show that boric acid [B(OH)3] can restore chloroperoxidase activity of Curvularia inaequalis recombinant apo‐haloperoxidase's (HPO) in the presence of hydrogen peroxide and chloride ions. Molecular modeling and semi‐empirical PM7 calculations support a thermodynamically highly favored (bio)catalytic mechanism similarly to vanadium haloperoxidases (V‐HPO) in which [B(OH)3] is assumedly located in apo‐HPO's active site and a monoperoxyborate [B(OH)3(OOH)−] intermediate is formed and stabilized by interaction with specific active site amino acids leading ultimately to the formation of HOCl. Thus, B(OH)3−HPO provides the first evidence towards the future exploitation of boron′s role in biological systems.

Drought, salinity and alkalinity are distinct forms of osmotic stress with serious impacts on rice productivity. We investigated, for a salt-sensitive rice cultivar, the response to osmotically equivalent doses of these stresses. Drought, experimentally mimicked by mannitol (single factor: osmotic stress), salinity (two factors: osmotic stress and ion toxicity), and alkalinity (three factors: osmotic stress, ion toxicity, and depletion of nutrients and protons) produced different profiles of adaptive and damage responses, both locally (in the root) as well as systemically (in the shoot). The combination of several stress factors was not necessarily additive, and we even observed cases of mitigation, when two (salinity), or three stressors (alkalinity) were compared to the single stressor (drought). The response to combinations of individual stress factors is therefore not a mere addition of the partial stress responses, but rather represents a new quality of response. We interpret this finding in a model, where the output to signaling molecules is not determined by their abundance per se, but qualitatively depends on their adequate integration into an adaptive signaling network. This output generates a systemic signal that will determine the quality of the shoot response to local concentrations of ions.

Constraining small peptides into specific secondary structures has been a major challenge in peptide ligand design. So far, the major solution for decreasing the conformational flexibility in small peptides has been cyclization. An alternative is the use of topological templates, which are able to induce and/or stabilize peptide secondary structures by means of covalent attachment to the peptide. Herein a multicomponent strategy and structural analysis of a new type of peptidosteroid architecture having the steroid as N‐substituent of an internal amide bond is reported. The approach comprises the one‐pot conjugation of two peptide chains (or amino acid derivatives) to aminosteroids by means of the Ugi reaction to give a unique family of N‐steroidal peptides. The conjugation efficiency of a variety of peptide sequences and steroidal amines, as well as their consecutive head‐to‐tail cyclization to produce chimeric cyclopeptide–steroid conjugates, that is, macrocyclic lipopeptides, was assessed. Determination of the three‐dimensional structure of an acyclic N‐steroidal peptide in solution proved that the bulky, rigid steroidal template is capable of both increasing significantly the conformational rigidity, even in a peptide sequence as short as five amino acid residues, and inducing a β‐turn secondary structure even in the all‐s‐trans isomer. This report provides the first evidence of the steroid skeleton as β‐turn inducer in linear peptide sequences.

The success of multi‐armed, peptide‐based receptors in supramolecular chemistry traditionally is not only based on the sequence but equally on an appropriate positioning of various peptidic chains to create a multivalent array of binding elements. As a faster, more versatile and alternative access toward (pseudo)peptidic receptors, a new approach based on multiple Ugi four‐component reactions (Ugi‐4CR) is proposed as a means of simultaneously incorporating several binding and catalytic elements into organizing scaffolds. By employing α‐amino acids either as the amino or acid components of the Ugi‐4CRs, this multiple multicomponent process allows for the one‐pot assembly of podands bearing chimeric peptide–peptoid chains as appended arms. Tripodal, bowl‐shaped, and concave polyfunctional skeletons are employed as topologically varied platforms for positioning the multiple peptidic chains formed by Ugi‐4CRs. In a similar approach, steroidal building blocks with several axially‐oriented isocyano groups are synthesized and utilized to align the chimeric chains with conformational constrains, thus providing an alternative to the classical peptido‐steroidal receptors. The branched and hybrid peptide–peptoid appendages allow new possibilities for both rational design and combinatorial production of synthetic receptors. The concept is also expandable to other multicomponent reactions.