zur Suche springenzur Navigation springenzum Inhalt springen

Publikationen - Stoffwechsel- und Zellbiologie

Sortieren nach: Erscheinungsjahr Typ der Publikation

Zeige Ergebnisse 1 bis 9 von 9.

Publikation

Ordon, J.; Martin, P.; Erickson, J. L.; Ferik, F.; Balcke, G.; Bonas, U.; Stuttmann, J.; Disentangling cause and consequence: genetic dissection of the DANGEROUS MIX2 risk locus, and activation of the DM2h NLR in autoimmunity Plant J. 106, 1008-1023, (2021) DOI: 10.1111/tpj.15215

Nucleotide-binding domain–leucine-rich repeat-type immune receptors (NLRs) protect plants against pathogenic microbes through intracellular detection of effector proteins. However, this comes at a cost, as NLRs can also induce detrimental autoimmunity in genetic interactions with foreign alleles. This may occur when independently evolved genomes are combined in inter- or intraspecific crosses, or when foreign alleles are introduced by mutagenesis or transgenesis. Most autoimmunity-inducing NLRs are encoded within highly variable NLR gene clusters with no known immune functions, which were termed autoimmune risk loci. Whether risk NLRs differ from sensor NLRs operating in natural pathogen resistance and how risk NLRs are activated in autoimmunity is unknown. Here, we analyzed the DANGEROUS MIX2 risk locus, a major autoimmunity hotspot in Arabidopsis thaliana. By gene editing and heterologous expression, we show that a single gene, DM2h, is necessary and sufficient for autoimmune induction in three independent cases of autoimmunity in accession Landsberg erecta. We focus on autoimmunity provoked by an EDS1-yellow fluorescent protein (YFP)NLS fusion protein to characterize DM2h functionally and determine features of EDS1-YFPNLS activating the immune receptor. Our data suggest that risk NLRs function in a manner reminiscent of sensor NLRs, while autoimmunity-inducing properties of EDS1-YFPNLS in this context are unrelated to the protein\'s functions as an immune regulator. We propose that autoimmunity, at least in some cases, may be caused by spurious, stochastic interactions of foreign alleles with coincidentally matching risk NLRs.
Publikation

Stuttmann, J.; Barthel, K.; Martin, P.; Ordon, J.; Erickson, J. L.; Herr, R.; Ferik, F.; Kretschmer, C.; Berner, T.; Keilwagen, J.; Marillonnet, S.; Bonas, U.; Highly efficient multiplex editing: one‐shot generation of 8× Nicotiana benthamiana and 12× Arabidopsis mutants Plant J. 106, 8-22, (2021) DOI: 10.1111/tpj.15197

Genome editing by RNA-guided nucleases, such as SpCas9, has been used in numerous different plant species. However, to what extent multiple independent loci can be targeted simultaneously by multiplexing has not been well documented. Here, we developed a toolkit, based on a highly intron-optimized zCas9i gene, which allows assembly of nuclease constructs expressing up to 32 single guide RNAs (sgRNAs). We used this toolkit to explore the limits of multiplexing in two major model species, and report on the isolation of transgene-free octuple (8×) Nicotiana benthamiana and duodecuple (12×) Arabidopsis thaliana mutant lines in a single generation (T1 and T2, respectively). We developed novel counter-selection markers for N. benthamiana, most importantly Sl-FAST2, comparable to the well-established Arabidopsis seed fluorescence marker, and FCY-UPP, based on the production of toxic 5-fluorouracil in the presence of a precursor. Targeting eight genes with an array of nine different sgRNAs and relying on FCY-UPP for selection of non-transgenic T1, we identified N. benthamiana mutant lines with astonishingly high efficiencies: All analyzed plants carried mutations in all genes (approximately 112/116 target sites edited). Furthermore, we targeted 12 genes by an array of 24 sgRNAs in A. thaliana. Efficiency was significantly lower in A. thaliana, and our results indicate Cas9 availability is the limiting factor in such higher-order multiplexing applications. We identified a duodecuple mutant line by a combination of phenotypic screening and amplicon sequencing. The resources and results presented provide new perspectives for how multiplexing can be used to generate complex genotypes or to functionally interrogate groups of candidate genes.
Publikation

Grützner, R.; Martin, P.; Horn, C.; Mortensen, S.; Cram, E. J.; Lee-Parsons, C. W.; Stuttmann, J.; Marillonnet, S.; High-efficiency genome editing in plants mediated by a Cas9 gene containing multiple introns Plant Communications 2, 100135, (2021) DOI: 10.1016/j.xplc.2020.100135

The recent discovery of the mode of action of the CRISPR/Cas9 system has provided biologists with a useful tool for generating site-specific mutations in genes of interest. In plants, site-targeted mutations are usually obtained by the stable transformation of a Cas9 expression construct into the plant genome. The efficiency of introducing mutations in genes of interest can vary considerably depending on the specific features of the constructs, including the source and nature of the promoters and terminators used for the expression of the Cas9 gene and the guide RNA, and the sequence of the Cas9 nuclease itself. To optimize the efficiency of the Cas9 nuclease in generating mutations in target genes in Arabidopsis thaliana, we investigated several features of its nucleotide and/or amino acid sequence, including the codon usage, the number of nuclear localization signals (NLSs), and the presence or absence of introns. We found that the Cas9 gene codon usage had some effect on its activity and that two NLSs worked better than one. However, the highest efficiency of the constructs was achieved by the addition of 13 introns into the Cas9 coding sequence, which dramatically improved the editing efficiency of the constructs. None of the primary transformants obtained with a Cas9 gene lacking introns displayed a knockout mutant phenotype, whereas between 70% and 100% of the primary transformants generated with the intronized Cas9 gene displayed mutant phenotypes. The intronized Cas9 gene was also found to be effective in other plants such as Nicotiana benthamiana and Catharanthus roseus.
Preprints

Grützner, R.; Martin, P.; Horn, C.; Mortensen, S.; Cram, E. J.; Lee-Parsons, C. W. T.; Stuttmann, J.; Marillonnet, S.; Addition of Multiple Introns to a Cas9 Gene Results in Dramatic Improvement in Efficiency for Generation of Gene Knockouts in Plants bioRxiv (2020) DOI: 10.1101/2020.04.03.023036

The recent discovery of the mode of action of the CRISPR/Cas9 system has provided biologists with a useful tool for generating site-specific mutations in genes of interest. In plants, site-targeted mutations are usually obtained by stably transforming a Cas9 expression construct into the plant genome. The efficiency with which mutations are obtained in genes of interest can vary considerably depending on specific features of the constructs, including the source and nature of the promoters and terminators used for expression of the Cas9 gene and the guide RNA, and the sequence of the Cas9 nuclease itself. To optimize the efficiency with which mutations could be obtained in target genes in Arabidopsis thaliana with the Cas9 nuclease, we have investigated several features of its nucleotide and/or amino acid sequence, including the codon usage, the number of nuclear localization signals (NLS) and the presence or absence of introns. We found that the Cas9 gene codon usage had some effect on Cas9 activity and that two NLSs work better than one. However, the most important impact on the efficiency of the constructs was obtained by addition of 13 introns into the Cas9 coding sequence, which dramatically improved editing efficiencies of the constructs; none of the primary transformants obtained with a Cas9 lacking introns displayed a knockout mutant phenotype, whereas between 70% and 100% of primary transformants generated with intronized Cas9 displayed mutant phenotypes. The intronized Cas9 was also found to be effective in other plants such as Nicotiana benthamiana and Catharanthus roseus.
Preprints

Barthel, K.; Martin, P.; Ordon, J.; Erickson, J. L.; Gantner, J.; Erickson, J. L.; Herr, R.; Kretschmer, C.; Ferik, F.; Berner, T.; Keilwagen, J.; Marillonnet, S.; Stuttmann, J.; Bonas, U.; One-shot generation of duodecuple (12x) mutant Arabidopsis: Highly efficient routine editing in model species bioRxiv (2020) DOI: 10.1101/2020.03.31.018671

Genome editing by RNA-guided nucleases in model species is still hampered by low efficiencies, and isolation of transgene-free individuals often requires tedious PCR screening. Here, we present a toolkit that mitigates these drawbacks for Nicotiana benthamiana and Arabidopsis thaliana. The toolkit is based on an intron-optimized SpCas9-coding gene (zCas9i), which conveys dramatically enhanced editing efficiencies. The zCas9i gene is combined with remaining components of the genome editing system in recipient vectors, which lack only the user-defined guide RNA transcriptional units. Up to 32 guide RNA transcriptional units can be introduced to these recipients by a simple and PCR-free cloning strategy, with the choice of three different RNA polymerase III promoters for guide RNA expression. We developed new markers to aid transgene counter-selection in N. benthamiana, and demonstrate their efficacy for isolation of several genome-edited N. benthamiana lines. In Arabidopsis, we explore the limits of multiplexing by simultaneously targeting 12 genes by 24 sgRNAs. Perhaps surprisingly, the limiting factor in such higher order multiplexing applications is Cas9 availability, rather than recombination or silencing of repetitive sgRNA TU arrays. Through a combination of phenotypic screening and pooled amplicon sequencing, we identify transgene-free duodecuple mutant Arabidopsis plants directly in the T2 generation. This demonstrates high efficiency of the zCas9i gene, and reveals new perspectives for multiplexing to target gene families and to generate higher order mutants.
Publikation

Ordon, J.; Bressan, M.; Kretschmer, C.; Dall’Osto, L.; Marillonnet, S.; Bassi, R.; Stuttmann, J.; Optimized Cas9 expression systems for highly efficient Arabidopsis genome editing facilitate isolation of complex alleles in a single generation Funct. Integr. Genomics 20, 151-162, (2020) DOI: 10.1007/s10142-019-00665-4

Genetic resources for the model plant Arabidopsis comprise mutant lines defective in almost any single gene in reference accession Columbia. However, gene redundancy and/or close linkage often render it extremely laborious or even impossible to isolate a desired line lacking a specific function or set of genes from segregating populations. Therefore, we here evaluated strategies and efficiencies for the inactivation of multiple genes by Cas9-based nucleases and multiplexing. In first attempts, we succeeded in isolating a mutant line carrying a 70 kb deletion, which occurred at a frequency of ~ 1.6% in the T2 generation, through PCR-based screening of numerous individuals. However, we failed to isolate a line lacking Lhcb1 genes, which are present in five copies organized at two loci in the Arabidopsis genome. To improve efficiency of our Cas9-based nuclease system, regulatory sequences controlling Cas9 expression levels and timing were systematically compared. Indeed, use of DD45 and RPS5a promoters improved efficiency of our genome editing system by approximately 25–30-fold in comparison to the previous ubiquitin promoter. Using an optimized genome editing system with RPS5a promoter-driven Cas9, putatively quintuple mutant lines lacking detectable amounts of Lhcb1 protein represented approximately 30% of T1 transformants. These results show how improved genome editing systems facilitate the isolation of complex mutant alleles, previously considered impossible to generate, at high frequency even in a single (T1) generation.
Preprints

Ordon, J.; Bressan, M.; Kretschmer, C.; Dall'Osto, L.; Marillonnet, S.; Bassi, R.; Stuttmann, J.; Optimized Cas9 expression systems for highly efficient Arabidopsis genome editing facilitate isolation of complex alleles in a single generation bioRxiv (2018) DOI: 10.1101/393439

Genetic resources for the model plant Arabidopsis comprise mutant lines defective in almost any single gene in reference accession Columbia. However, gene redundancy and/or close linkage often render it extremely laborious or even impossible to isolate a desired line lacking a specific function or set of genes from segregating populations. Therefore, we here evaluated strategies and efficiencies for the inactivation of multiple genes by Cas9-based nucleases and multiplexing. In first attempts, we succeeded in isolating a mutant line carrying a 70 kb deletion, which occurred at a frequency of ~1.6% in the T2 generation, through PCR-based screening of numerous individuals. However, we failed to isolate a line lacking Lhcb1 genes, which are present in five copies organized at two loci in the Arabidopsis genome. To improve efficiency of our Cas9-based nuclease system, regulatory sequences controlling Cas9 expression levels and timing were systematically compared. Indeed, use of DD45 and RPS5a promoters improved efficiency of our genome editing system by approximately 25-30-fold in comparison to the previous ubiquitin promoter. Using an optimized genome editing system with RPS5a promoter-driven Cas9, putatively quintuple mutant lines lacking detectable amounts of Lhcb1 protein represented approximately 30% of T1 transformants. These results show how improved genome editing systems facilitate the isolation of complex mutant alleles, previously considered impossible to generate, at high frequency even in a single (T1) generation.
Publikation

Gantner, J.; Ordon, J.; Ilse, T.; Kretschmer, C.; Gruetzner, R.; Löfke, C.; Dagdas, Y.; Bürstenbinder, K.; Marillonnet, S.; Stuttmann, J.; Peripheral infrastructure vectors and an extended set of plant parts for the Modular Cloning system PLOS ONE 13, e0197185, (2018) DOI: 10.1371/journal.pone.0197185

Standardized DNA assembly strategies facilitate the generation of multigene constructs from collections of building blocks in plant synthetic biology. A common syntax for hierarchical DNA assembly following the Golden Gate principle employing Type IIs restriction endonucleases was recently developed, and underlies the Modular Cloning and GoldenBraid systems. In these systems, transcriptional units and/or multigene constructs are assembled from libraries of standardized building blocks, also referred to as phytobricks, in several hierarchical levels and by iterative Golden Gate reactions. Here, a toolkit containing further modules for the novel DNA assembly standards was developed. Intended for use with Modular Cloning, most modules are also compatible with GoldenBraid. Firstly, a collection of approximately 80 additional phytobricks is provided, comprising e.g. modules for inducible expression systems, promoters or epitope tags. Furthermore, DNA modules were developed for connecting Modular Cloning and Gateway cloning, either for toggling between systems or for standardized Gateway destination vector assembly. Finally, first instances of a “peripheral infrastructure” around Modular Cloning are presented: While available toolkits are designed for the assembly of plant transformation constructs, vectors were created to also use coding sequence-containing phytobricks directly in yeast two hybrid interaction or bacterial infection assays. The presented material will further enhance versatility of hierarchical DNA assembly strategies.
Preprints

Gantner, J.; Ilse, T.; Ordon, J.; Kretschmer, C.; Gruetzner, R.; Löfke, C.; Dagdas, Y.; Bürstenbinder, K.; Marillonnet, S.; Stuttmann, J.; Peripheral infrastructure vectors and an extended set of plant parts for the modular cloning system bioRxiv (2017) DOI: 10.1101/237768

Standardized DNA assembly strategies facilitate the generation of multigene constructs from collections of building blocks in plant synthetic biology. A common syntax for hierarchical DNA assembly following the Golden Gate principle employing Type IIs restriction endonucleases was recently developed, and underlies the Modular Cloning and GoldenBraid systems. In these systems, transcriptional units and/or multigene constructs are assembled from libraries of standardized building blocks, also referred to as phytobricks, in several hierarchical levels and by iterative Golden Gate reactions. This combinatorial assembly strategy meets the increasingly complex demands in biotechnology and bioengineering, and also represents a cost-efficient and versatile alternative to previous molecular cloning techniques. For Modular Cloning, a collection of commonly used Plant Parts was previously released together with the Modular Cloning toolkit itself, which largely facilitated the adoption of this cloning system in the research community. Here, a collection of approximately 80 additional phytobricks is provided. These phytobricks comprise e.g. modules for inducible expression systems, different promoters or epitope tags, which will increase the versatility of Modular Cloning-based DNA assemblies. Furthermore, first instances of a “peripheral infrastructure” around Modular Cloning are presented: While available toolkits are designed for the assembly of plant transformation constructs, vectors were created to also use coding sequence-containing phytobricks directly in yeast two hybrid interaction or bacterial infection assays. Additionally, DNA modules and assembly strategies for connecting Modular Cloning with Gateway Cloning are presented, which may serve as an interface between available resources and newly adopted hierarchical assembly strategies. The presented material will be provided as a toolkit to the plant research community and will further enhance the usefulness and versatility of Modular Cloning.
  • Die Leibniz-Gemeinschaft
  • Digitalisierung in der Landwirtschaft
  • Martin-Luther Universität Halle
IPB Mainnav Search